There are many condensate installations that are one metre or under.

So we thought it would be great for installers to have everything in one box. Easy to order and have ready to install

The Condensate ProCombo kit 1m 2  prioritises easy installation and high-quality design to ensure every external condensate is protected against freezing conditions and looks perfect no matter where it’s fitted

Many boiler manufacturers recommend taking the insulation through the fabric of the wall to the inside, or to take the insulation and seal into the fabric of the wall. This means that a 65mm hole is needed to comply and to be sealed correctly

Feedback received regarding cases where a Pipesnug can’t be fitted as the hole has been cored/chopped out too large needing more Bond & Seal to make a quality seal around the fabric of the wall. We have upgraded our kit, removing the Pipesnug and providing a 150g tube of Bond & Seal (nearly double the previous amount) which fits into a mastic gun, this gives you have more Bond & Seal and can comply with all MIs and regulations

You can still use a Pipesnug if required as they are readily available from merchants separately

The pre-made connection is ready to go right out of the box. Use the Bond & Seal to connect more insulation to make sure all pipes are sealed/protected, and to seal around the inside and outside of the wall. Use the spacer bar in combination with the pipe clip to ensure debris and dirt does not collect behind the insulation. Condensate Pro provides not only the very best protection but looks quality on customers homes/property.

Watch the video to see how easy it is to protect and connect with the Connection kit 2.

Contents:

One 1m Length of Insulation (fits 32mm solvent weld pipe) 

One connection (fits 32mm solvent weld pipe) 

One 150g Mastic gun tube of Bond and Sea

One length of spacer bar

Two  pipe clips (50mm)